BOBCAT Error Code Logo

Bobcat S70 H2707 Error Code

H2707 Fault Code Meaning :

Front Rod Solenoid Open Circuit

Front Rod Output Open Circuit

Angle Blade Rod Solenoid Open Circuit

Front Rod Solenoid Open Circuit

H2707 Error Code

Front Rod Solenoid Open Circuit is the main cause of H2707 error.The condenser converts gases into liquids, which expels heat from your rig. Materials can build up over time, causing a layer of dirt and grime to form on the condenser's coils. Your AC system will only blow hot air since the refrigerant fails to cool down.

Bobcat S70 Photo

Tip For S70 Model

There is a control lock sensor in the left console which deactivates the hydraulic control levers (joysticks) and the traction drive system when the control console is raised. The console must be in the locked down position for the hydraulic control levers (joysticks) and traction system to operate.

NOTE: If the control lock sensor does not deactivate the control levers and traction system when console is raised, see your Bobcat S70 dealer for service.

About | Contact | Privacy

Copyright © 2019 All rights reserved.

Bobcat Error Code

This website is not official or registered website. Please go official Bobcat website.

Sitemaps : 1-2-3-4-5